COMING SOON
Connect your SIA-DCS compatible alarm system to AuditLog LIVE iD. It works with Ajax, Jablotron
Feel free to ask us if your current alarm system is compatible (AuditLog Live does supply SIA signaling devices to connect to most devices)
This will be how to select incoming SIA commands to automatically log into the TAG history.
YOUR SIA DEVICE ARC SETTINGS
- In the ARC settings of your device, go to the ARC / monitoring stations page.
- Select “SIA Protocol”.
- Enable “Connect on demand”.
- Place Account ID - 3-16 ASCII hex characters. For example, 000. (Supplied by AuditLog Live).
- Insert AuditLog Live IP address. (Supplied by AuditLog Live).
- Insert AuditLog Live listening port. (Supplied by AuditLog Live).
- Select Preferred Network. Ethernet is preferred for devices or GSM.
- Enable Periodic Reports. The interval at which the device reports to AuditLog Live (Set to 30 Minutes).
- Encryption is preferred but optional. Password is 16, 24 or 32 ASCII characters.
- Encryption password will be supplied by AuditLog Live.